Austvision Structural Glass Wall Systems Australian Glass Assemblies Australian Glass Assemblies (AGA), located in Melbourne, Australia, has been manufacturing and designing structural glass wall systems for over fifteen years. These systems began with the traditional exterior patch plate systems and have evolved into the Austvision system, which incorporates Spider Austfix hardware to provide a structural glass envelope for building facades on any plane. The Spider Austfix system offers the benefits of completely flush external appearance as well as the design freedom for mechanical fixtures to be small and discreet to suit aesthetic objectives. Austvision "Spider" Glass Fin System The Austvision Glass Fin System, which incorporates the Spider Austfix fittings, allows for a totally flush exterior surface over large expanses of glass. A glass fin stabilizer supports the glass façade as a back up structure while allowing for the maximum vision area. The glass fin stabilizers are connected to the glass façade by means of the Spider Austfix fittings, which allows transfer of the wind loading from the facade through the fins to the surrounding structure. Details Austvision "Spider Tension Rod System The Austvision Spider Tension Rod System is an alternative back up structure for glass facades, which incorporates high strength stainless steel tension rods in a vertical and /or horizontal truss design. The tension rod truss system provides a minimal profile while allowing for unusual and exciting design possibilities. They also provide the dynamic flexibility required to absorb thermal expansion and seismic movement. Details Austvision Frameless Glass Balustrade Fittings AGA offers a wide variety of fittings for frameless glass balustrades, which include the visionary design of the Austvision Spider 444/2 Fittings, which are stylish, high quality and maintenance-free. Austvision Glass Canopies, Stairwells and Covered Walkways Laminated glass can be incorporated into horizontal structures, which can greatly expand the use of vision panels in applications such as canopies, stairwells and covered walkways. Austvision Frameless Glass Squash Court Backwalls Austvision Squash and Racquetball glass walls are available in standard sizes or custom designs. The freestanding backwalls are available in standard 2 or 4 panel designs. The full height door backwall design will withstand the impact conditions and the deflection criteria within the ISRF specification requirements. |  Request A Quote Form  | |  Glass Entry Hardware  |  Structural Glass Walls  |  Stadium Suites  | |  Operable Door Hardware  |  Tensile Structures  |  About Us  |  Home  | Copyright© 1999 DHD International. All rights reserved. This Site Created & Maintained By Doubleclick'd Publications